|No-spaces|

Description
-----------

Reads *SACfiles* in SAC format or reads filenames and controlling parameters
from *saclist* [or standard input] and will plot seismograms on a map.

Required Arguments
------------------

*SACfiles*
    SAC files to plot on a map. Only evenly spaced SAC data is supported.

*saclist*
    One ASCII data table file holding a number of data columns. If *saclist* is not given then we read from standard input.
    Parameters are expected to be in the following columns:

        *filename* [*X* *Y* [*pen*]]

    *filename* is the name of SAC file to plot.
    *X* and *Y* are the position of seismograms to plot on a map.
    On linear plots, the default *X* is the begin time of SAC file, which will be adjusted if **-T** option is used,
    the default *Y* is determined by **-E** option.
    On geographic plots, the default *X* and *Y* are station longitude and latitude specified in SAC header.
    The *X* and *Y* given here will override the position determined by command line options.
    *pen*, if given, will override the pen from **-W** option for current SAC file only.

.. _-J:

.. |Add_-J| unicode:: 0x20 .. just an invisible code
.. include:: ../../explain_-J.rst_

.. _-R:

.. |Add_-Rgeo| unicode:: 0x20 .. just an invisible code
.. include:: ../../explain_-Rgeo.rst_

Optional Arguments
------------------

.. _-B:

.. include:: ../../explain_-B.rst_

.. _-C:

**-C**\ [*t0/t1*]
    Read and plot seismograms in timewindow between *t0* and *t1* only.
    *t0* and *t1* are relative to a reference time specified by **-T**.
    If **-T** option is not specified, use the reference time (kzdate and kztime) defined in SAC header instead.
    If only **-C** is used, *t0/t1* is determined as *xmin/xmax* from **-R** option.

.. _-D:

**-D**\ *dx*\ [**/**\ *dy*]
    Offset seismogram positions by the given mount *dx/dy* [Default is no offset].
    If *dy* is not given it is set equal to *dx*.

.. _-E:

**-Ea**\|\ **b**\|\ **k**\|\ **d**\|\ **n**\ [*n*]\|\ **u**\ [*n*]
    Choose profile type (the type of Y axis).

        **a**: azimuth profile.

        **b**: back-azimuth profile.

        **k**: epicentral distance (in km) profile.

        **d**: epicentral distance (in degree) profile.

        **n**: trace number profile. The *Y* position of first trace is numbered as *n* [Default *n* is 0].

        **u**: user defined profile. The *Y* positions are determined by SAC header variable user\ *n*, default using user0.

.. _-F:

**-F**\ [**i**][**q**][**r**]
    Data preprocess before plotting.

        **i**: integral

        **q**: square

        **r**: remove mean value

    **i**\|\ **q**\|\ **r** can repeat multiple times. For example, **-Frii** will convert acceleration to displacement.
    The order of **i**\|\ **q**\|\ **r** controls the order of the data processing.

.. _-G:

**-G**\ [**p**\|\ **n**][**+g**\ *fill*][**+z**\ *zero*][**+t**\ *t0/t1*]
    Paint positive or negative portion of traces.
    If only **-G** is used, default to fill the positive portion black.

        **p**\|\ **n** controls the painting of positive **p**\ ortion or **n**\ egative portion.
        Repeat **-G** option to specify fills for positive and negative portions, respectively.

        **+g**\ *fill*: color to fill

        **+t**\ *t0/t1*: paint traces between t0 and t1 only. The reference time of *t0* and *t1* is determined by **-T** option.

        **+z**\ *zero*: define zero line. From *zero* to top is positive portion, from *zero* to bottom is negative portion.

.. _-M:

**-M**\ *size*\ [*u*][*/alpha*]
    Vertical scaling.

        *size*\ [*u*]: scale all traces *size*\ [*u*] on a map. The default unit is :term:`PROJ_LENGTH_UNIT`.
        The scaling factor is defined as ``yscale = size*(north-south)/(depmax-depmin)/map_height``.

        *size*/*alpha*:

            *alpha* < 0, use the same scaling factor for all traces. The scaling factor will scale the first trace to *size*\ [*u*].

            *alpha* = 0, multiply all traces by *size*. No unit is allowed.

            *alpha* > 0, multiply all traces by ``size*r^alpha``, r is the distance range in km.

.. _-Q:

**-Q**
     Plot traces vertically.

.. _-S:

**-S**\ [**i**]\ *scale*
    Sets time scale in seconds per *unit* while plotting on geographic plots.
    Append **c**, **i**, or **p** to indicate cm, inch or points as the unit.
    Use :term:`PROJ_LENGTH_UNIT` if *unit* is omitted.
    Use **-Si**\ *scale* to give the reciprocal scale,
    i.e. cm per second or inch per second.

.. _-T:

**-T**\ [**+t**\ *n*][**+r**\ *reduce_vel*][**+s**\ *shift*]
    Time alignment and shift.

        **+t**\ *tmark*: align all trace along time mark. *tmark* are -5(b), -4(e), -3(o), -2(a), 0-9(t0-t9).

        **+r**\ *reduce_vel*: reduce velocity in km/s.

        **+s**\ *shift*: shift all traces by *shift* seconds.

.. _-U:

.. include:: ../../explain_-U.rst_

.. _-V:

.. |Add_-V| unicode:: 0x20 .. just an invisible code
.. include:: ../../explain_-V.rst_

.. _-W:

**-W**\ *pen*
    Set pen attributes for all traces unless overruled by *pen* specified in *saclist*.
    [Defaults: width = default, color = black, style = solid].

.. _-X:

.. include:: ../../explain_-XY.rst_

.. |Add_-h| unicode:: 0x20 .. just an invisible code
.. include:: ../../explain_-h.rst_

.. |Add_perspective| unicode:: 0x20 .. just an invisible code
.. include:: ../../explain_perspective.rst_

.. include:: ../../explain_-t.rst_

.. include:: ../../explain_help.rst_